Although the cabinets that are more popular today are wooden cabinets, the ceramic stoves are still the cabinets that many people will love. So, today we will come to understand the detailed construction steps of the ceramic tile stove, and by the way, what are the precautions for installing the ceramic tile stove. 
Tile cooktop detail construction steps
1. First of all, when you decide to make a ceramic stove, you must first plan. You can find similar stoves on the Internet for reference, and you can also visit the neighboring homes that have ceramic tile stoves around. In fact, the appearance of the ceramic stoves after cooking is not very different from other stoves. Your favorite reference is just fine.
2. After the above plan is completed, you can use the cement bricks to cover the bottom. The height of the stove can be set according to your own needs. The general height is about 80cm. It is recommended that the cement brick store is the most suitable.
3. The next step is to calculate the approximate number of tiles needed based on the size. This is generally calculated by a professional ceramic tile stove installation master. If we have no experience, the calculation error may be relatively large. When the quantity is calculated, you can cut the required specifications according to your needs.
4. Cover the cut tiles with cement, then use the tiles that stand as columns, sandwich them back to back, glue them together with a professional structure, and wait for it to solidify. 
5. The standing tile is glued to the bottom tile with a structural adhesive. Since the structural glue cures for a long time, it takes at least 12 hours, so wait.
6. After the standing tiles are fixed, lay a tile on top. After laying out a layer, you can use the cut tile again and put it on top to raise the height of the table top.
7. Then the next process is to customize the counter and counter door, these two if there is no experience to recommend the merchant package installation!
8. At this point, the installation of the ceramic tile stove was completed. Is it not so difficult to imagine? 
Tile stove installation considerations
1. The position of the ceramic tile stove is best designed in the corner near the kitchen, because it is more convenient to operate, and more space-saving, allowing you to cook handy.
2. When designing, remember to keep the distance between the pool or the cooktop and the wall at least 40 cm, so that there will be enough space for operation.
3. You can place a dishwasher and a trash can under the sink in the tile stove, and placing the oven under the stove will make your daily cooking very convenient and very convenient. 
Editor's summary: The above is the introduction of detailed construction steps and installation precautions for ceramic tile stoves by Xiaobian. After reading this article, we have further detailed construction steps and precautions for the ceramic tile stoves . Meet you.
12 Volt Dc Appliances,Dc Appliances ,Dc Appliances For Off-Grid,5 In.Series Led Downlight
Wuxi Shengda Yukun Energy Development co.,Ltd , https://www.xlite-solarlight.com