Fingerprint locks, as a new generation of high-tech smart locks, must be much more maintenance and maintenance than traditional mechanical locks. Here are 8 important precautions for your fingerprint lock maintenance and maintenance.
1. Prohibition of unprofessional disassembly
The internal structure of the fingerprint lock is often much more complicated than the traditional lock. It contains a variety of high-tech electronic products. If you are unfamiliar with this, it is best not to disassemble it. Basically, if you have any questions, you can consult the manufacturer. Generally, there will be special after-sales service personnel to help you solve the problem. This also reminds you that at the time of purchase, it is best to choose a door lock manufacturer or agent with good after-sales service to purchase a fingerprint lock.
2, the choice of battery should be cautious
Try to choose a large AA alkaline battery with a large capacity. When the battery is low, replace the battery in time to ensure the normal use of the door lock. If the battery is not replaced in time, you can use an external power supply for emergency unlocking. Kaimai Lock's fingerprint locks are equipped with an external power supply excuse to ensure that your fingerprint lock can enter the door as usual when the battery is exhausted.
3, fingerprint lock should pay attention to waterproof
Fingerprint locks are different from ordinary mechanical locks. They contain electronic components or circuit boards. These originals are waterproof. Therefore, it is necessary to minimize the direct contact between the fingerprint lock and water.
4, prohibit hard objects or nail scratches fingerprint collection window, to ensure clean and no scratches
In addition to scratching the fingerprint collection window with a hard object, after a long period of use, use a soft cloth to wipe out the dirt on the surface of the collection window. When the weather is wet, immediately clean the surface moisture with a dry soft cloth to avoid its influence. Sensitivity of fingerprint collection.
5, avoid hanging heavy objects on the fingerprint lock handle
The handle is the key part of opening and closing the door lock, and its flexibility directly affects the use of the door lock, so do not hang heavy objects on the door handle.
6. Avoid scrubbing fingerprint locks with corrosive chemicals
The fingerprint lock housings produced by most companies are made of stainless steel and other steel materials. Therefore, it is not possible to scrub or touch the fingerprint lock with corrosive chemicals to avoid damage to the lock surface protective layer and affect the gloss of the lock surface.
7. The emergency mechanical key is properly placed
Under normal circumstances, the emergency mechanical key of the fingerprint lock is placed outside the locked control room. When it is used to unlock the lock, it can be used in time.
8, the key can not be pulled smoothly, avoid adding any oil for lubrication
Generally, when the lock is used for a long time, the key insertion and removal may not be smooth. At this time, a small amount of graphite powder or pencil powder may be applied into the lock body slot to ensure that the key is inserted and unplugged smoothly. However, do not add any oil for lubrication to prevent the grease from sticking to the marble spring, causing the lock to not rotate and not open.
Maintenance precautions
1. Check the locking of the door lock screw. In the actual use of the door lock, due to the vibration of the switch door, etc., the fixing screws of the door lock may be loose. The engineering maintenance personnel should regularly check the door lock and tighten the loose screws to ensure the normal use of the door lock. Includes: front and rear panel fixing screws, side slat fixing screws, lock fixing screws, and door plate fixing screws.
2. Check the flexibility of the door lock handle. When the door lock is in actual use, the door lock handle may be loose due to the vibration of the switch door, etc., and the engineering maintenance personnel should check it regularly.
3. Door deformation inspection door may cause door deformation due to the environment and age used, which will affect the normal switch of the door, which will seriously affect the normal service life of the door lock. A professional carpenter needs to adjust the door.
4. Check the battery voltage of the door lock is insufficient. The three-solid fingerprint lock is powered by a battery, and the alkaline battery is preferably used. When the battery is used for a certain period of time, the voltage is reduced to a serious shortage, which affects the normal opening of the door. The battery needs to be replaced at this time.
Editor in charge: Xu Yuehua
Blockboard is a multi-ply board with a block core. This gives the board optimum flatness of each panel as well as a high resistance to wrapping. Blockboard is obtainable in both lightweight and heavyweight, where by the heavyweight board is normally classed as laminboard.
Luli Group Co., Ltd, is a leading supplier if wood panel products since year 1985, has the capability and capacity to produce high quality blockboard yet with competitive pricing. And we are able to assist you at all time with professional handling.
Advantages of Blockboard:
High dimensional stability
Termite and borer resistant
Stable in all weather conditions
The details of Blockboard:
Sizes: 1220mm x 2440mm(Standard Size), 1250mm x 2500mm or according to customer`s request.
Thickness: 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 22mm, 25mm, etc.
Core: Falcata/Malacca, paulownia, eucalyptus, fir, poplar, pine, birch, hardwood, etar, pine, birch, hardwood, etc.
Density: 450kg ~ 680kg/m3
Blockboard
Batten Blockboard,18mm Blockboard,Laminated Blockboard,Blockboard Price
Luli Group Co.,Ltd. , https://www.plywoods.nl