the reason
Dirt and contamination not only hinder the aesthetics, but also contain aggressive chemicals that degrade the sandstone. Pollution is generated during construction or during maintenance and must be treated differently. In general, prevention is more important than cleaning, and daily long-term maintenance is better than sudden acute cleaning. Soil contamination can be reduced and prevented by proper design and material selection, careful construction and maintenance. The so-called correct design, that is, attention to the following things on the sandstone products:
Specific requirements
When the product is processed in a plane, the wall rock is inclined to the outside, the wall portion is not required to be drained by the wall, the water inflow into the narrow part, the water flows through the concrete, the surface of the glass or other building materials, and the surface of the sandstone is easily accessible to the sandstone. The product causes pollution. In special circumstances, materials that match the properties of the stone should be chosen. For example, when used as a wall lining, it is necessary to protect the front of the elevator, the vicinity of the lift switch, furniture, and the like. Combinations between incompatible materials are prone to contamination. (For example, liquid leakage from a car to a sandstone surface.) A permeable mortar laid on a deck or step will become a coal-based contamination. The seam after the wrong cleaning process is also an important reason.
specific measure
The correct treatment includes careful attention to transportation, storage, construction and other aspects. Thin panels are not only fragile and fragile, but also susceptible to stains. Attention must be paid to stubborn stains such as mortar, paint, protective layer spots, scaffolding rust and mechanical lubricants.
From the storage period to the end of construction, the stone must be covered with a plastic layer or anti-fouling cloth as much as possible. Fully understand that the entire service process may cause internal and external pollution due to pollution or human contact. It must be isolated from the source of pollution as much as possible, often removing dirt and the like. In contaminated areas, use appropriate paint and building cleaners to clean the stains. When cleaning the stone, it should be moderate to prevent damage to the environment and workers or damage to the stone itself.
Island Light is a type of Pendant Light commonly used over the central island in a kitchen or over a long table in a dining room. It typically has multiple bulbs to provide sufficient light to illuminate the entire area. Island Lights come in a wide variety of designs, ranging from traditional pendant styles to modern, industrial, or artistic designs. Island Lights not only provide light but can also serve as a decorative element in a room.
Chandelier Light is a commonly used lighting decoration on the island of a restaurant, which can not only meet the lighting function, but also serve as the main focal point decoration of the restaurant. The Island Light is made of a variety of materials, such as crystal, glass, metal, etc., and has a variety of design styles, which can be matched according to your preferences and the overall style of the restaurant. As a rule of thumb, a gap of 72 cm to 90 cm between the edge of the Lighting Fixture and the surface of the island is optimal. Small islands (1.2 to 1.5 m long) are usually suitable for two medium-sized Island Light or a large Island Light. As for the larger islands, three medium-sized or two larger Island Light can be handled.
Island Light,Modern Pendant Lights For Kitchen Island,Island Light For Kitchen,Kitchen Island Pendant Lighting
Zhengdong Lighting Co., Ltd. , https://www.sundint.com