What are the hidden dangers of winter decoration should be prevented in advance, you know?
Kriging Home
Line tube installation is not reliable
The supervisor reminded that the putty powder around the wall of the line pipe was not eradicated. This is the most basic requirement during construction, because the putty powder will fall out of powder when it hits water, and there is no adhesive force with the cement mortar. The two lines were not connected between the red brick and the original wall, and they did not pull ribs. This meant that the wall was built out of thin air and had no firmness.
Distribution box location is too low
Supervisor reminds: This problem is quite terrible. The distribution box is placed 30cm from the ground. It seriously violates the construction regulations. There is a strong voltage current in the distribution box. If a child in the home accidentally touches it, the consequence is disastrous and it is easy to cause a safety accident. The distribution box should be placed 2m above the ground. In addition to major safety hazards, the spacing between strong and weak electricity is also too close and susceptible to interference.
Route cutting corners
Supervisor reminds that: When audio cables are routed for cutting corners and materials, there is a section of lines that are exposed and there is no protection. It is easy to damage the cables. For a long time, the audio cable is easily damaged, and the audio and video effects will be affected. It will take a long time to repair.
Gas pipe cannot be concealed
Supervision reminder: It is stipulated in the text that the gas pipes cannot be concealed. On the one hand, it is assumed that gas leaks are difficult to detect. On the other hand, maintenance and management will not be carried out in the future.
Load-bearing structure is destroyed
Supervisors reminded that when doing concealed works, the main bars of the wall were cut off, but they were not reinforced. This involved the security of the houses. The state clearly stated that the main beams and bearing walls could not be destroyed at will.
Decoration Experience Entrance Decoration Restaurant Decoration Home Decoration Cement House Home Red Brick Decoration Home
The working principle of a Medium Flow Peristaltic Pumpis like a snake swallowing an egg. The hose is constantly squeezed through the roller to make the hose generate pressure and push the liquid forward. Our designers make the Peristaltic pump head and hose fit perfectly by designing precise roller size and pump head structure. So as to achieve the purpose of accurate liquid metering transmission or filling
1. Clean and pollution-free: the fluid only passes through and touches the Peristaltic Pump hose.
2. High precision: constant current, reproducibility of up to 0.5%, and flow can be precisely adjusted.
3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.
4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.
5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.
6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.
7. With stop valve function, no siphon, no seals, stop valve and check valve function.
8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.
9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.
Medium Flow Peristaltic Pump,Constant Flow Peristaltic Pump,Intelligent Accuracy Pump,24V Peristaltic Pump
Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crprecisionpumps.com