[China Aluminum Industry Network] Aluminium profile segmented negative pressure annealing degreasing process is a process for degreasing and mechanical properties adjustment of aluminum profiles. The entire process will be divided into two steps: degreasing and mechanical performance adjustment. First, deoiling at a low temperature, and then adjust the mechanical properties at high temperatures. This process has been widely used in the production of aluminum profiles. This article will briefly introduce the specific processes of the process:
1. After the aluminum material is loaded into the furnace, it is heated to a predetermined temperature above 160° C., and then exhausted from the furnace with a high temperature fan for 1 to 3 times so that the pressure in the furnace is negative to the ambient atmosphere. The aluminum profile is maintained within the range of 0.8 to 0.95 of the ambient atmospheric pressure. The extraction time is determined by the process experiment depending on the volume of the furnace and the specification of the aluminum material. The temperature of the previous evacuation is 160 to 260°C, the second and the second. The temperature of the three times of evacuation is 260-360°C. Each evacuation is an isothermal evacuation process, but the temperature of the latter evacuation should be at least 50°C higher than the temperature of the previous evacuation, after each evacuation, To change the furnace gas, stop the pumping and allow the air to enter the furnace so that the pressure in the furnace is balanced with the ambient atmosphere, and at the same time the temperature is raised to the temperature of the next pumping at or above 260 °C;
2. After the last gas exchange, the temperature of the furnace is increased to 380-480°C for heat preservation and annealing. The mechanical properties of the Shenyang aluminum profile are adjusted. The annealing time is also determined by the process experiment according to the material performance requirements.
3, cooling out of the furnace, get more end products.
Segmented negative pressure annealing degreasing process can effectively remove oil and adjust mechanical properties of aluminum profiles to ensure the quality of aluminum profiles, and at the same time improve the mechanical properties of aluminum profiles and improve the application efficiency of aluminum profiles.
The corridor area is a large flow of people in the wet market and the ground is vulnerable to wear and tear, so it is particularly important to choose a suitable pvc floor mat. This hollow design of the hollow Non Slip Mats is very suitable for the corridor area of the wet market. The following is a brief introduction to the hollow Anti Slip Pvc Floor Mat. The first is its anti-slip design: the hollow anti-slip mat uses a special surface texture and material, which has excellent anti-slip performance. This design effectively prevents pedestrians from slipping in the corridor area and improves the safety of walking. Moreover, it is breathable: the hollow design of the floor mat allows air to circulate freely, helps to keep the ground dry, and reduces the growth of mold and bacteria, which is conducive to maintaining the cleanliness of the corridor area. Finally, its wear resistance, hollow non-slip mat made of wear-resistant materials, can withstand high intensity flow of people and friction, extend the service life, reduce ground wear.
Welcome to visit us.
Anti Slip Flooring Roll,PVC Mat Rolls,Anti Slip Mats Roll,Plastic Mat Roll
Jiangyin Yining E-Commerce Co., Ltd , https://www.pvcmatyining.com