The use of pipe pump Pipeline pump is pressurized transmission pipeline to solve the pipe pressure is too low and developed a new pump, horizontal centrifugal pump than the current application has more advantages. The main points of its use are: 1) test work: Check whether the connector is loose; hand crank the coupling so that the rotor turns a few times to see if the unit rotation is flexible, whether there is noise and uneven feeling, to determine the pump Is there a foreign body or the shaft is bent or not, the seal is installed incorrectly; Check the seal cavity clean No. 20 lube is filled with 1/2 cavity space; pump unit surface is clean; unit to no-load test. 2) manual start: filling pump (first time), slightly open the outlet valve, start the motor, the pressure rise and confirm the smooth operation of the pump group outlet valve to the operating conditions. 3) Operation check: When the pipeline pump is operating normally (frequency conversion), it should periodically check and record the readings of the ammeter, voltmeter, vacuum gauge, pressure gauge and flow meter of the pump set. Unit vibration, noise, temperature rise is normal. Shaft seals should not have significant aviation fuel leaks.
Intergrated Led Emergency Modules
The Intergrated Led Emergency Modules is match the compact LED fittings to improve the emergency function. Normally it is workable for small wattage from 3-60W LED panels, downlights, led tubes, tri-proof ceilings. Full power output or half power emergency output is optional. Customized emergency lighting time is available. Automatic lighting up when main power failures. Widely using for home, parking lot, office, building, warehouse, school, hospital, workshop etc.
Emergency Light Module,Emergency Led Flasher Module,Led Emergency Modules,Intergrated Led,led light with emergency battery
Foshan Nai An Lighting Electric Co.,ltd , https://www.fsnaipsled.com