First, ceiling
The variety, specification, color of the materials used for the ceiling, and the basic structure and fixing method shall be in accordance with the design requirements and in accordance with the current standards; the ceiling keel shall not be twisted or deformed, the wooden keel or wooden ceiling shall be fireproofed, the boom shall be straight, and the keel shall be firmly installed. Reliable, straight around; light fixtures can be directly hung on reinforced keel; lamps or ceiling fans with a weight greater than 2 kilograms must not borrow ceiling keels; hooks should be attached separately to civil structures; metallic materials, synthetic materials, PVC ceiling The ceiling light installation must have a dragon skeleton, and the wooden structure must be waterproof and fireproof.
Second, doors and windows
The variety, specification, color, opening direction, combination form and installation position of the doors and windows shall conform to the design and current standards; the installation shall be firm, the appearance shall be free of deformation, open glue, and breakage; the door and window sashes shall be opened flexibly, without block and rebound phenomenon, accessories Complete and correct location.
Third, fine wood products
The keel, lining board and panel of fine wood products and fixed homes shall meet the requirements of the design. The wood moisture content of the fine wood products shall not be greater than 12, and the exterior materials shall not have dead knots, wormholes and cracks; fine wood products and grassroots must be Studs are firm and loose. The lining board and the panel must be firmly bonded, and no layering or druming should occur. The panel splicing should be planed with similar patterns and the seam width should be less than 1 mm. The surface texture of the fine wood products should be similar, smooth, consistent in color and free of pollution. Fine wood products processing village right, in line with the normal use of features, smooth surface, smooth, no dead ends, lines smooth, chiseled, no hanging plastic, exposed nail caps and other defects.
Four, top corner line
Skirting board, top corner line, hanging mirror line, waist line and other decorative lines should be straight and even, and the intersection should be closed correctly, with firm bonding and tight seams. When the wooden decoration line butt, should use 45 degrees plus glue slope, visual joints within 1 meter is not obvious; fixed screw nails can not rust and smooth, plaster line without stains; angle line allow difference 1 mm, The allowable deviation of the individual floral ornaments is not more than 1mm.
V. Paint
The surface of fine wood products brush oil can not be seen on the surface of the brush pattern, can not have trachoma, bubbles, bristles, stains, nails, scratches; clear oil wood grain, uniform color, feel smooth and have a sense of hardness, nails patchwork putty The color insertion should be the same as the panel color, no difference in the eye view of 80CM; the mixed oil feels smooth, the eye feel is even and smooth, the paint film is full; the oil surface is moderate in thickness, no flow mark, drumming, and missing brush, etc. Clean.
Window lacquer decoration glass decoration design glass door ceiling fan light decoration home
Solar Panel,Solar Charger Co., Ltd. , http://www.chsolarbag.com