With the improvement of living standards, modern people's thinking has begun to change, the antique style has become more and more intense, and the art of stone carving has become more and more popular. In this way, antique stone carvings are becoming more and more popular. In people's concepts and understanding, antique stone carvings are generally treated in the same way as fake ancient stone carvings. In fact, imitation and pseudo are two different concepts. Imitation is imitation and emulation, while fake ancient stone carving is different, pseudo is fake, that is, pure fake.
(1) Brush the surface of the stone with nitric acid or hydrochloric acid. The stone surface has been corroded due to chemical reactions. It can be placed in the open air in the summer, and it is similar to the cultural relics. It is black and bright due to the water of nitric acid or hydrochloric acid. Moreover, it has a wrinkled skin on the top 4). But there are no such things in real artifacts.
(2) The stone carvings are fired with fire, and the yellow soil is used to smear the loess, and the soil is shaped after being dried.
(3) The stone carvings are cooked for a few days with a large amount of smoked water. The stone carving is taken out and dried to give a color like iron rust.
(4) The effect of boiling stone carving with Tenghuangbaiyu for several days, the same effect as (3).
(5) Using a fragrant head to smoke a layer of original tires, place them in the sunny place, spray water several times a day, and then, after several months, brush the floating ash floating soil with cool water, and the remaining glaze and stone carvings Real loess rust is almost the same.
(6) Wash with potassium permanganate and apply it to the stone statue. After infiltrating the potassium permanganate into the inside, according to the requirements of the color depth, rinse the surface with clean water, then wipe with a little yellow mud. Once again, you can achieve the effect of antique works. Here you need to know the real stone carving artifacts. If you use alkaline water, the rust will not peel off. If the rust is fake, it is realistic, but its rust is no longer present with alkaline water.
(7) Using an oxygen gun for fire treatment, according to the hardness of different stones, the time of the fire is 4-9 seconds, the distance of the oxygen gun from the surface of the stone is controlled at 6-11 cm, and the burnt area of ​​the stone is 75- 96, then use the iron brush to clean the hair, depending on the old and old degree, use the brown hair machine to polish through, then apply the Chen tea juice 47, add ink 3.1, rust juice 4.3, after drying and waxing, to reach the stone antique requirements.
Reflective glass is clear or tinted glass that has a very thin layer of metal or metallic oxide on the surface. The reflective coating is applied during the float process. The thicker the glass is, the less light will pass through the window. The reflective coating reduces heat gain and glare from the outside while allowing visible light to enter. Toughened Reflective can be used directly, and also can be processed into Laminated Glass, Insulated Glass for windows, doors, building walls and so on.
Tempered Glass is often used in applications where using standard glass could pose a potential danger. Tempered glass is stronger than standard glass and does not shatter into large shards when broken. This is important, because it can greatly minimize potential danger in the case of a break. Manufactured through a process of extreme heating and rapid cooling, tempered glass is much harder than normal glass.
In the case that tempered glass does break, it shatters into small pebbles that are void of dangerous, sharp edges. As tempered glass is considered to be much safer than normal glass, you may often here it referred to as safety glass or TOUGHENED GLASS . Tempered glass has a wide variety of uses that you'll find just about everywhere. In fact, the shower doors in your bathroom or the side glass on a motor vehicle are examples of tempered glass.
Annealed float glass mainly clear float glass, ultra clear float glass, color tinted glass, reflective glass, they are substrate, can be processed into tempered glass, laminated glass, insulated glass, LOW-E glass, Frosted Glass , Back Painted Glass, Printed Glass , coated glass. Tinted reflective glass mainly brown, grey, blue, green. It can be processed into colored reflective tempered glass, Reflective tempered laminated glass, Reflective Insulated Glass and so on on customer's request.
Custom Tempered Reflective Glass, Reflective Tempered Insulated Glass, Tempered Glass Reflection, Reflective Laminated Glass
Shanghai Lead Glass Co.,Ltd , https://www.leadglazing.com