Most of today's home purchases are not existing homes. They are all pre-sales at the start of opening. It is equivalent to building a house after paying the money first. This kind of general problem is not found on the spot, and it is necessary to see what kind of house they are buying when the house is built. Therefore, when you hand in the house , you must carefully check the acceptance before you can deliver it to your own hands. Let's take a look with Xiao Bian.
How to make a house inspection when you make a house
When the developer informs us to submit the room, we can prepare a plastic washbasin (for acceptance of the water pipeline), a feeler gauge (for measuring the width of the crack), a small hammer (for the acceptance of the wall empty Drum), 1 5 meter tape (for measuring the floor height), 1 computer (for calculation of data), 1 broom (for house cleaning), 1 multimeter (for testing each strong outlet And weak electricity can clear) and other tools.
How to make a room inspection 2 inspection room wall
The house inspection starts with the wall. You can tap the wall with your hand or with a small hammer. You can judge whether there is hollow on the wall from the sound of the tapping, and then look carefully to see if cracks appear.
How to inspect the house when submitting the house 3, inspection roof
You can measure whether the roof is inclined from the floor height, select four or five different areas, and then measure the floor height at these locations. If the data is consistent, it means that there is no roof tilt.
How to inspect the house 4 when submitting the house, inspection pipeline
If it is a heating pipe or a water pipe, it can be shaken to see if it is firm; if the water pipe, then open the water valve to see if the drainage is smooth, there is no construction waste; if the kitchen flue, you can use a lighted paper towel Placed under the flue mouth, smoke can be sucked away; gas pipelines can also be tested with smoked paper, placed near the alarm device to see the device sensitivity, but also depends on the normal use of the intake solenoid valve.
How to inspect the house when submitting the house 5
The acceptance criteria of the circuit is to see whether there are significant signs for each shunt switch in the switch box, see if the switch is installed firmly, see if the socket is loose or not plugged in, see the number of weak power sockets, see the doorbell, video intercom Does the intercom, sight glass, emergency call button, etc. work properly?
How to inspect the house when handing in the house 6, inspection doors and windows
Including the corridor doors and windows and interior doors and windows, corridor windows should pay attention to whether there are screens, look at the corridor security doors are scratches, deformation, whether the sealed door and frame, the door lock switch is normal; interior doors and windows, then pay attention to its sealing, To see if the scat of the push-pull screens and sashes of the windows collide with each other, the bathroom windows also need to be equipped with security nets.
Editor's Note: The above is about how to submit a home inspection when the house is submitted . The house has a good acceptance, which is more comfortable for the decoration and use of our new home. We hope that the contents shared by Xiaobian can give you some help. If you want to learn more about decoration, you can pay attention to our website information.
H3 Led Headlight,H3 Headlight,H3 Headlight Led,H3 Led Headlight Bulb
CHANGZHOU CLD AUTO ELECTRICAL CO.,LTD , https://www.cld-led.com