Wall and wood furniture occupy a large area of ​​space, and construction will directly affect the “face†problem of the entire home. After complaining about its decoration, it is better to do "homework" before construction and take the first step to understand how to supervise the work of oil masters, so that we can have a heart.
Conch Cement   American Master Coating
Latex paint is the most common wall decoration material at present, and can be painted, rolled or sprayed in specific construction. If the workers are not serious or perfunctory during construction, small color differences often occur. Especially with deeper emulsion paints, this problem is more likely to occur. Wall expert reminds: Before the use of latex paint need to add a certain amount of water, deployment of a good latex paint to run out. Paints of the same color are also best painted once. If the wall needs to be repaired after construction, the whole wall should be repainted again.
The best time to brush wood paint is to wait for the room to finish brushing the floor tile or wood floor. If you must brush, it is best to clean the room. In a room with no paving slabs or wooden floors, the dust in the room is very large. At this time, if you use wood lacquer, the dust will easily adhere to the surface of the wooden products that have been brushed through wood lacquer. The graded sandpaper is polished and then brushed again to solve it, but the touch and overall effect of brushing out will be discounted. After the floor tiles are finished, the dust content in the air is much less than before the shop. Basically, the dust will not adhere to the surface of the wooden products after the wood paint is applied again.
The paint master waits for the wall to dry and then finishes the putty. The putty layer dries and paints. If there is no reason after brushing the paint, install the lamps and various electrical switches. Ask the students to remind the master who installed the lamps and electrical switches to take care to clean the hands before loading them so that they will not soil the walls. It also saved a touch up process. Of course, to defile the wall, the decoration team is sure to let paint masters make up the paint again, that is, to clean up the dirty walls (if it is a paint company, they will also let the master to make up the paint, if you pay attention A lot of painters will leave a part of the paint after brushing the wall. The remaining part of the paint is used to make up the paint.) Just pay attention, do not let the master of lighting fixtures fouled the wall, you can let the paint master less run (at least half a day). Generally speaking, the wood paint is brushed before the wall paint is applied. This is to prevent the wood paint from affecting the wall surface of the wall paint during the dry process. Of course, in the actual operation process, you can also paint the wood lacquer after laying the floor tiles (the floor trowel has been approved before paving the floor tiles), and then paint the wood lacquer after the wood lacquer dries out. Just do so, of course. Will affect the schedule. If you are afraid of affecting the duration of the project, you must minimize the impact of dust in the air, and you should diligently clean up the sanitation of the room.
Construction Acceptance Three Trees Painted Floor Tiles Paint Room Latex Paint Switch Appliances Floor Tiles
Glue Furniture Grade Osb,Furniture Structural Slab Osb,Construction Grade Osb,Furniture Grade Osb
Fushi Wood Co., Ltd. , http://www.sgplywood.com