 |
Even rock climbing requires grip points and support points to climb up from the ground. But now there are already robots that can climb vertical smooth surfaces without grasping points and supporting points. International Climbing Machines (ICM) recently released two new types of wall climbing robots. The two robots are mainly used to inspect and clean large machines such as dams, wind turbines and submarines that are difficult to inspect. The MINI Climber robot can be squeezed into a confined space, while the MAXI robot can perform large area inspections and cleaning.
The MINI Climber robot weighs 9 kg, about 35 cm long and 38 cm wide. It is made of carbon fiber and epoxy resin and can maintain a minimum weight. It also has a built-in laser robotic arm that removes coating from a confined space such as the interior of a nuclear submarine on a complex surface. ICM said that they have recently completed the development of the MINI Climber robot, which will soon work for the US Navy. However, the MAXI robot is still under development and will be available in July 2014. But the company’s CEO, Sam Maggio, said that the MAXI robot will be able to climb onto the outer surface of the naval vessel and complete the task of removing the coating. It can also handle 25mm obstacles.
In order to allow these robots to climb on various surfaces, the company designed them to use vacuum systems to attract walls. ICM considers that there may be various obstacles, bolts, windowsills, or dirt on a smooth surface. The robot needs the ability to handle these things. Therefore, they developed a thick foam rubber pad to form a vacuum. "Rolling pressure seals." These foams can handle 20 mm bulges, so it can crawl on brick walls, steel frames and aircraft fuselage.
Both robots are remotely controlled and workers use a video camera and a video game controller to operate. It has multiple cameras and sensors on it, as well as abrasive and sandblasting cleaning systems and painting systems. For example, it can climb the wind blades of wind turbines, clean the inner walls of tanks, clean the bilges of submarines and submarines, or inspect concrete dams and nuclear power plants.
Hand Pads And Roll
Non-woven abrasive scouring pad roll is made from high quality nylon fibre.
Bonding abrasive on the non-woven with special resin. It's with high flexibility.
Industrial scouring pads are mainly used in the coating treatment of the surface of metal, wood and other materials, mechanical maintenance and cleaning such as cleaning, polishing, rust removal, deburring, and high-quality appearance decoration line processing operations.
The characteristics of industrial scouring pads are generally mainly elastic grinding, which can effectively prevent excessive cutting and scratching the surface of the work piece; followed by cold cutting, the common structure is effective for heat dissipation, which can prevent discoloration and deformation caused by overheating of the work piece during processing; its The third is that industrial scouring pads can prevent clogging, water and oil resistance; during the grinding process, the fibers will continue to be lost, and new grinding ore will continue to form naturally, providing better processing quality for the work piece.
We distributes and wholesales various brands of Bonded Abrasives , Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc, Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Abrasive Scouring Pad,Scouring Pad Rolls,Non Woven Hand Pad,Abrasive Scouring Pad Roll,Green Scouring Pad
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com