Wall tile paste construction procedures and specifications

1. Construction procedure for wall tiles pasting

The paste of wall ceramic tile is one of the main technical tasks that tiler is engaged in home decoration project. The standard ceramic tile paste procedure is as follows: grassroots cleaning → wipe base ash → brick selection → immersion → row bricks → bullets → paste standard points → paste tiles → sew → sew → clean.

2. Construction specifications for wall tile paste

(1) When processing at the grassroots level, all types of dirt on the wall should be cleaned and watered and moistened one day in advance. For example, when the grass-roots level is a new wall, when the cement mortar is 70% dry, bricks, bullets, and tiles must be placed.

(2) The standard points must be pasted before the official paste to control the flatness of the paste surface. At any time during operation, the flatness should be checked with a ruler. If it is uneven or not straight, it must be removed.

(3) Tiles must be soaked in clean water for at least two hours before they are affixed. Tiles should not be bubbling and should be removed for drying. Paste from the bottom up paste, requiring mortar full, ash, must remove the heavy sticky, not allowed from the brick joints, mouth ash filling pad.

(4) When it comes to sticking, it encounters pipes, lighting switches, and supports for bathroom equipment, etc. It must be cut and matched with the entire brick set, and it is forbidden to put together and paste with non-complete bricks. The whole or independent part of the paste should be completed at one time, and once it cannot be completed, the joint mouth should be left at the construction joint or the female corner.

When the bricklayers are doing this process, the students must see if they are doing this. If the construction team steals work, it will be easy to produce such things as: The tiles are not glued together, and they are easy to fall off.

Tile Paving Wall Construction Tile Switch Home Improvement Cement Bathroom Tiles

Crystal Diamond Surface/Laminate Flooring

Hongda Anxin Decorative Material Co., Ltd. , http://www.hb-flooring.com