The door is the first embodiment of the style of home decoration and has always been said of the "facade."
The decoration of the house is to create a warm and harmonious living environment, so choose the wooden door, the first consideration is the coordination and style of style and color with the living room style. The color of the wooden door can be considered close to the color of the furniture, and the contrast between the environment and the harmony of the environment.
After careful consideration of style and color, the product process and quality are followed. The quality of the product can be assessed through hand and side light inspection methods. The frame, panel, and corners of the door are stroked by hand, requiring no scratching, soft and delicate, and then standing on the side of the door to glimpse the door panel. Whether the paint surface has concave and convex waves, through the inspection of these two points can basically know whether the work is qualified. At the same time, hardware accessories are also an extremely important part, affecting the service life of the door.
Because of the different position of each door, its functionality is also different. While ensuring the overall quality, you can make appropriate choices according to the specific use of the door.
Bedroom doors emphasize privacy, so most use panel doors.
The study room doors can be made of translucent glass or full glass doors. Art glass such as matte, cloth, color strips and electroplating can also be used. The specifications are the same as the bedroom doors. Among them, the study door combined with frosted glass and iron art can add a lot of glory to the study with beautiful curves.
The design of the kitchen door is more style, according to the requirements of lighting, transparent glass door is the best choice for the kitchen door. The kitchen uses a large area of ​​glass, which can not only isolate the fumes but also show the owner's carefully selected cabinets. For full space savings, kitchen doors can also be considered with folding doors.
The bathroom door can only be translucent and cannot be seen through. It should be equipped with double-sided matte or dark fog glass. If a panel door is used, a small piece of frosted glass can be used in the center of the door to decorate it. In the use of toilets, it can ensure privacy and allow people outside to see light and avoid interruptions.
About wooden door acceptance method
1 Look at the gap: It is not more than 0.2mm for the wood seal line, corner line, and waistline facing panel; the angle between the line and the cable mouth is not more than 0.3mm; the interface between the decorative panel and the panel is not more than 0.2mm; the whole surface of the sliding door is The error does not exceed 0.3mm.
2 Look at the structure: The structure is straight. Whether horizontal or vertical, the correct carpentry practices should be straight.
3 Look at the corner: Is the corner accurate? The normal corners are all 90 degrees, except for special design factors.
4 Look at the parquet: Whether the parquet is tight or accurate. The correct wooden pattern is to be seamless or to maintain a uniform distance.
5 Look at radian: Whether radian and roundness are smooth and sleek. In addition to a single, a number of the same shape to ensure consistency in the shape.
6 Look at the cabinet door: Is the cabinet door switch normal? When the door is open, it should be light and no noise.
7 Look at the leveling: The surface of the woodworking project should be kept flat and there should be no drumming or breaking.
8 Look at symmetry: Symmetrical carpentry projects are symmetrical.
Doors and windows Acceptance glass Doors Decoration design Style Decorative paints Kitchen doors Bedroom doors Furnishing style Cabinets Doors Doors Kitchen sliding doors Craft glass Household cupboards Glass furniture Panel furniture Glass cabinets Doors glass Folding doors Cabinets Doors Kitchen doors Kitchens folding doors Glass sliding doors Glass doors Door kitchen glass sliding door study furniture bathroom sliding door bathroom door bathroom folding door bathroom design small study bedroom bedroom bedroom door bedroom door
Snow Melt Salt for Road is a new kind of snow/ice-melting agent, which is made of inorganic salts with additives(corrosion inhibitors). It can be used to melt the snow and ice in the temperature range of 0'C to -45'C .
1, Common roads and Expressways.
2, Yards, Schools and Factories.
3, Common facilities.
1, Low dosage, fast efficiency and long operational time.
2, Antirust, environment friendly.
3, Anti-slippery.
4, Harmless to animal and plant.
5, Low cost, thus it can be used in commercial scale.
1, Appearance: white , light gray granule .
2, physical property: soluble in water and release heat, easy to deliquescence.
3, Freezing point: according to local climate conditions, can be set up as low as -35'C to -45'C.
Snow Melting Agent,Calcium Magnesium Acetate,Snow Melting Salt,Organic Deicer Agent
WEIFANG MELTWAY CO., LTD , http://www.globalmeltway.com