Home>Bearing knowledge>The reason and treatment of motor bearing overheating

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Reasons for motor bearing overheating and disposal methods

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1, the bearing is damaged. Should be replaced.
2. The rolling bearing grease is too little, too much or has iron scraps and other impurities. The bearing grease capacity should not exceed 70% of the total volume; those with impurities should be replaced.
3. The shaft and the bearing cooperate too tightly or too loosely. When it is too tight, it should be ground from the head; when it is too loose, it should be set to the shaft.
4. The bearing and the end cap cooperate too tightly or too loosely. The bearing chamber is processed when it is too tight; when it is too loose, the steel sleeve is set in the end cover.
5. The two caps or bearing caps of the motor are not properly installed. Install the end cap or bearing cap into the flat; tighten the screws.
6. The belt is too tight or the coupling is not properly installed. Adjust the belt tension; proofread the coupling.
7, the sliding bearing lubricant is too little, there are impurities or oil ring stuck. Should be refueling, new oil; repair or replace the oil ring.

---

Recommend to friends comments close window

Bearing related knowledge

"KOYO heavy-duty bearing" use of improved ball bearing vibration and noise reduction skills analysis in the industry to select NSK bearing specifications in detail of foreign machinery industry bearing heat disposal methods (below) Protection and protection of spindle bearings in imported bearings

This article links to http://
Please indicate China Bearing Network http://

Previous:Viewing methods for bearings Next: Protection measures for maintaining outstanding bearing functions for a long time

Kitchen Faucet

Kitchen Faucet,Basin Faucet,Bathroom Faucet

Guangdong Huayou Hardware Products Co.,Ltd , https://www.gudsink.com